WELCOME TO THE ARMORTEK SHOP
Below you will find a listing of our kits available for sale. Some of these are available for immediate shipment, whilst others are available to Pre-Order. In addition, we stock and sell a large range of Spare Parts for our kits – if you would like some spare parts then contact us here.
Please note that we only make a limited number of kits – once those are sold out, we are unlikely to make the same kit again for a few years.
If you have any questions, please check the list of Frequently Asked Questions, or contact us.
FREQUENTLY ASKED QUESTIONS
The kits include all the parts necessary to build the model as illustrated.
This includes:
- machined, cast, and sheet metal parts
- Bearings and all fasteners required
- Comprehensive instruction manual and assembly drawings.
The basic kit provides you with a complete static model.
Option Packs can be added to provide Motion, Sound, Gun Recoil and Smoke.
Not included are adhesives and paints.
Our kits are designed in-house and manufactured at our site in Hampshire in the UK. We have state of the art CNC machines on which we machine the components in our kits.
We recommend that you have some experience of modelling or working with metal to build our kits. Although the parts are manufactured on state of the art CNC machines, the builder can expect to need to fettle some parts – for example, filing, clear holes, deburring, etc.
A comprehensive instruction booklet with drawings and part numbers breaks down the construction into simple stages. We also offer support via email and there is a very resourceful customers forum to provide guidance if you get stuck.
You will need a set of good hand tools. The following list should be regarded as the minimum:
- Spanners (wrenches) 5.5mm, 7mm, 8mm, 10mm and a mini adjustable.
- Allen (hex) keys 1.5mm-6mm.
- Screw drivers small flat blade 3mm and 4mm.
- Pliers 5” long nose, 5” combination.
- Small hammer
- Files selection of needle files and small hand files.
In addition to the above, a selection of larger files and a cordless drill with 3mm, 4mm and 5mm drill bits (for clearing through holes) can be useful to speed things up. You will also need a good sturdy work bench as these kits are heavy once fully assembled.
Our kits are predominantly made out of metal – with the obvious exception of components like rubber tyres and canvas roofs.
We use mainly aluminium. In general, steel is used for some drive components and thin sheet metal, whilst brass is used for some bushes and decorative components.
Yes, our vehicle kits can be remote controlled through the addition of the Motion option pack.
Yes they can. Some customers choose not to paint their kits.
However, some of the parts of the kit are mild steel and would need either an oil or lacquer coating to prevent them from rusting. All other parts can be left untreated as bare metal components.
We predominately sell kits for our customers to build themselves.
However, we do offer a service to build and paint the model. We have limited capacity to offer this service – if you are interested, please contact us at sales@armortek.co.uk. This service cannot be ordered through our website.
Our kits tend to be produced in batches of limited numbers – typically less than 100 kits – hence they are Limited Edition. Each kit* comes with a certificate to indicate its serial number and certify its authenticity.
Historically Limited Edition runs of the same model have been run between 3 to 8 years apart, with some models having had no re-run to date.
*The field guns, Bailey bridge and hedgehogs do not have a serial number and are not considered limited editions as they are generally maintained in stock.
At any one time we only have a small range of kits for sale. If a model is not listed on our site, the chances are it is not available for sale
Unfortunately not. Due to the economics of research, design and production, a one-off kit would cost many times the cost of a standard model.
We do have a small display area at our manufacturing facility, however, due to the ongoing pandemic and the risk to our staff, no visitors are allowed at our premesis until further notice.
The number of parts per kit will vary by model and it is best to check the product’s page for more details.
However, as an example, the Elefant kit contains:
- Almost 190 UNIQUE parts (excluding fasteners)
- Over 1,300 parts (excluding fasteners)
- Almost 1,500 fasteners
In general, one of our tanks takes about 100 to 200 hours to build and paint, but it is not an easy question to answer and depends on your modelling experience as well as how much time is spent on painting and adding after market details or customising parts.
We have customers who build the kits and keep them in their bare metal finish and we have customers who can spend years researching a certain tank and faithfully replicating all the details of that particular tank onto their model. We also have the full spectrum of customers in between.
Armortek kits vary in weight and it is best to check the product pages to get an estimate of the weight.
However, a couple of examples:
Elefant (Basic kit with no options added) – approx 90kg
Tiger 131 (All options and batteries included) – approx 130kg
No. We have specialised in 1/6th scale metal models and do not currently produce any other scales.
Option packs are optional extras that can be bought and added to the basic Armortek kit.
We currently sell the following option packs:
Motion Pack – enables motion and steering for the vehicle through radio control. In the case of tanks it also allows turret rotation and elevation/ slew of the main gun. The product pages for the relevant motion pack provides more details on what is included.
Sound Pack – enables sounds linked to the motion of the vehicle such as start up and running. Some sound cards also enable crew voices. Motion pack must be purchased in order to use the sound pack.
Recoil Pack – in the case of tanks, it allows for the recoil of the main gun via radio control. The sound of firing is also triggered. Sound pack must be purchased in order to use recoil.
Smoke Pack – allows for a smoke effect to be created on starting and driving the vehicle. Motion pack must be purchased in order to use the Smoke Pack.
We currently do not supply an internal combustion engine.
During the early development of our models several internal combustion engine drive options were tried. However, it quickly became clear that this system was noisy, messy, mechanically complicated and difficult to control. As a result we do not offer this option.
Yes.
The idea behind offering the basic kit and then the option packs is to allow individual builders to engineer their own alternatives.
However, we will not be able to offer support to builders who choose to install their own motors and electrical parts.
No they cannot.
Yes you can.
We generally keep option packs in stock for several years so they can be purchased at a later date. With most of our kits, the option packs can be added once the kit has been built, however some disassembly may be required.
KITS AVAILABLE FOR PRE-ORDER
KITS AVAILABLE FOR DELIVERY NOW
The kits listed below are in stock and available for delivery now.
KITS NO LONGER AVAILABLE
The kits listed below have sold out and are no longer available.
OPTION PACKS
With the option packs, you can bring your model to life with Remote Control.
