Jagdtiger No.41 in Germany

[Sascha Hornbach]

Autumn is Jagdtiger time

I do a few weldlines and also started to make the castingsurface on the drive wheel.

regards

Sascha

[Dale jordan]

Very nice welds well done Sascha . Dale

[Sascha Hornbach]

Thanks Dale!

I started to build the electronics. The board is from 8mm PVC. I also made the Airtank mounts from PVC.

Airtank

Engines

Batteries right side

Main Switch, Relais and Controller (switch)

Hatch closed, Mainswitch reachable through the Hatch.

100A Fuse

regards

Sascha

[Sascha Hornbach]

Hi Folks,

I finished the travellock A-Frame with some weldings. I also worked on the drivers hatch and noticed some differences with the original. So I made some CAD work to compare the measures and shapes from the original blueprints and images of 331 in the states. I decited to rebuild the complete frontplate with the gearplate and the two hatches. Next step is to build the bolts and some other details. More to come....

regards

Sascha

[Sascha Hornbach]

Last days I build all the boltscrew imitations from brass. The hatches get angled edges, lifting hooks and the hatchstopper are also done. I rebuild the drivers scopeholder from original blueprints. Next step is the turning part of the scopeholder and the cover above it.

regards

Sascha