John’s Czech Hedgehog

All topics related to Armortek's Czech Hedgehog
John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

John’s Czech Hedgehog

Post by John Heath »

Received the little hedgehog kit this morning. Looks a nice little “weekend” kit.Bought just the one for now to see what it’s like.

I’ll be finishing mine in the very dark blue as often used in the east rather than the beach brown.

Filling in the button head bolts with putty will be a bit tedious. Some experimenting to do texturing the finish and adding some rust on some scrap angle section.

John

Image

Image

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Assenbled and I think I’ve got the bolt pattern right. 🙏🏼

Also tested the textured paint on some scrap. Will look good once the final colour is applied and rusted a bit.

Image

Image

Mark Heaps
Posts: 676
Joined: Sun Apr 03, 2016 3:39 pm
Has liked: 199 times
Been liked: 214 times

Re: John’s Czech Hedgehog

Post by Mark Heaps »

Not sure about the bolt pattern. You may need to Czech it :lol:

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

The bolt patterns do seem to vary a lot. Found a photo of two sitting side by side and they had been bolted together differently. May make some minor changes and will be fitting a few hex head bolts as again found photos where a few hex head bolts had been used.

Two sections were fastened together in the factory and the third fitted in the field which would explain the differences.

Stephen White
Site Admin
Posts: 2821
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 565 times
Been liked: 1297 times

Re: John’s Czech Hedgehog

Post by Stephen White »

Mark, we may need to run that again....

The Czech's in the posts.

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Two photos. One is by Armortek and the other is mine. Which is which?

Image

Image

User avatar
Brian Ostlind
Posts: 1161
Joined: Sat Oct 28, 2017 6:56 am
Location: Oregon, USA
Has liked: 620 times
Been liked: 1194 times

Re: John’s Czech Hedgehog

Post by Brian Ostlind »

Looks like a nice kit. I need a couple of these!
epic

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Applied putty to the button head bolts. A light sanding then ready for priming. Used Green Stuff putty which I find so much better than Milliput and much easier to work with. Could never go back to Milliput. Makes nice weld detail as well.

Fitted a few hex head bolts instead of the button head bolts. Found when researching the subject this happened quite often. Field repairs I assume.

Image

Image

Image

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Just add rust. 😁

Primed, textured paint applied and the Tamiya matt paint mixed to the approximate shade of dark blue used in the east.Decided to not go with the brown as used on the beaches it is so commonly seen in models despite not being the colour used often inland. Work done in filling in the button head bolts was worth it.

Light rust to be applied and finished with matt clear.

Image

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Not sure about the rust. May need a little bit more work.

Image

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

Not being happy with the rust decided to repaint in very dark blue. Looks almost black. I’ll leave it this way for a while while deciding what to do about rust.

Image

Pete Nash
Posts: 317
Joined: Sat Oct 01, 2016 10:11 am
Location: Near Ipswich, suffolk
Has liked: 398 times
Been liked: 152 times

Re: John’s Czech Hedgehog

Post by Pete Nash »

Don't know about creating rust?

Leave it outside for a while, it will soon go rusty, and it will be proper rust, not simulated :) :lol:

John Heath
Posts: 166
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been liked: 99 times

Re: John’s Czech Hedgehog

Post by John Heath »

The multipurpose hedgehog. 😀

Image

Vince Cutajar
Posts: 1734
Joined: Wed Nov 15, 2017 1:43 pm
Location: Malta
Has liked: 385 times
Been liked: 1102 times

Re: John’s Czech Hedgehog

Post by Vince Cutajar »

Love the idea. It's a good selling point.

Vince

User avatar
Adrian Harris
Posts: 4242
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 560 times
Been liked: 591 times

Re: John’s Czech Hedgehog

Post by Adrian Harris »

I wonder if future orders will be shipped with 6 Armortek mugs :?:

Adrian
Contact me at sales@armortekaddict.uk for details of my smoker fan control module and other electronic gadgetry

Post Reply