Universal Carrier Ambulance

Forum for discussion relating to the Universal Carrier
Post Reply
Peter Withers
Posts: 17
Joined: Sun Feb 14, 2021 8:08 pm
Been liked: 13 times

Universal Carrier Ambulance

Post by Peter Withers »

Hi, This is my first Armortek model and my first voyage onto the forum!

I'm part way through building UC number 64 and it occurred to me whether there were interesting variations of UC. I did find a few pictures of an ambulance version and I have to confess to thinking I'd like to convert mine to an ambulance. Is anyone else doing any kind of conversion or modification? The photos I found on line show a UC with upper sides extended to the back and the vertical rear panel above the mudgards missing. Two stretchers then fit one each side of the engine housing. Looks like the drawbar is missing and there are a few extra storage boxes. There is also a version with canvas tilt but I prefer the look of the open one at the moment. If anyone has any further info or pictures of ambulance versions I'd be very interested.

Thanks.

User avatar
Tim Page
Posts: 359
Joined: Wed Dec 03, 2014 10:45 am
Location: Milton Keynes
Has liked: 15 times
Been liked: 139 times

Re: Universal Carrier Ambulance

Post by Tim Page »

Hi Peter, I must confess that i had not seen an ambulance version of the UC until i saw your post and had a ferret about.
I expect you have already seen this but in case not.....
UC_Amb.JPG
UC_Amb.JPG (143.57 KiB) Viewed 629 times
Cheers
Tim
2008 Armortek Panther ausf.G #0035
2009 Armortek BefehlsPanzer 111 ausf.J #0011
2010 Armortek A34 Comet #0031 (SOLD)

Peter Withers
Posts: 17
Joined: Sun Feb 14, 2021 8:08 pm
Been liked: 13 times

Re: Universal Carrier Ambulance

Post by Peter Withers »

Yes, that was the first one I found but a deeper dig revealed this:
UC ambulance2.png
UC ambulance2.png (324.42 KiB) Viewed 620 times

Robert Reid
Posts: 523
Joined: Mon Oct 09, 2017 9:49 pm
Has liked: 82 times
Been liked: 375 times

Re: Universal Carrier Ambulance

Post by Robert Reid »

Very cool variant!

Would love to see someone do one of those.

Cheers,

RPR

User avatar
Tim Page
Posts: 359
Joined: Wed Dec 03, 2014 10:45 am
Location: Milton Keynes
Has liked: 15 times
Been liked: 139 times

Re: Universal Carrier Ambulance

Post by Tim Page »

Id really like to see a Wasp flamethrower variant.
Those look very cool.

Tim
2008 Armortek Panther ausf.G #0035
2009 Armortek BefehlsPanzer 111 ausf.J #0011
2010 Armortek A34 Comet #0031 (SOLD)

Peter Withers
Posts: 17
Joined: Sun Feb 14, 2021 8:08 pm
Been liked: 13 times

Re: Universal Carrier Ambulance

Post by Peter Withers »

OK Robert, you get your wish. Mine is being built as per the second photo above!

Dave Green
Posts: 10
Joined: Sun May 12, 2019 9:33 am
Location: Stourbridge
Been liked: 4 times

Re: Universal Carrier Ambulance

Post by Dave Green »

Something of a post script but here's a photograph of the actual UC ambulance that the drawing is based on.
Attachments
20210305_072636.jpg

Peter Withers
Posts: 17
Joined: Sun Feb 14, 2021 8:08 pm
Been liked: 13 times

Re: Universal Carrier Ambulance

Post by Peter Withers »

Progress so far on the ambulance conversion, side panels modified and first stretcher rails temporarily located. I used a bit of artistic licence on the towing eyes having removed the existing ones. Rear steps will be added and the stretcher rails fitted on both sides.
Attachments
P1000485.jpg

Dave Dibb (Armorpax)
Posts: 1049
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 73 times
Been liked: 675 times
Contact:

Re: Universal Carrier Ambulance

Post by Dave Dibb (Armorpax) »

Hi Peter,

I like this a lot. Almost tempted to build another UC :-)

Best regards

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Post Reply