Jeffs 25 pounder

All topics related to Armortek's 25 Pdr
Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Mon Jan 14, 2019 4:10 pm

Thanks Robert, but the real early innovators are Marcus, Ian Rodney and Dave Dibb, I started building my 25 pounder 4 or 5 years after the release and have avoided some of the early pitfalls,thanks to them, and have to admit I have used some of their great ideas, I have also put my own interpretations on the kit, this is why we can all benefit by sharing our build experiences on the forum
regards Jeff

Marcus Kwa
Posts: 149
Joined: Wed Nov 13, 2013 6:22 pm
Been Liked: 16 times

Re: Jeffs 25 pounder

Post by Marcus Kwa » Mon Jan 14, 2019 5:08 pm

She is a beauty Jeff!!! Looking forward to what you will do with the sighting system!
Oh and don't worry: I will definitely copy a lot of your mods as soon as I have time!!
Cheers,

Marcus

Robert Reid
Posts: 298
Joined: Mon Oct 09, 2017 9:49 pm
Has liked: 36 times
Been Liked: 110 times

Re: Jeffs 25 pounder

Post by Robert Reid » Mon Jan 14, 2019 10:47 pm

Thanks, Jeff.

And thanks for the kudos over on my engine build. Coming from you, that is really, really high praise, indeed!

Cheers,

RPR

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Sat Jan 19, 2019 7:24 pm

Hi I have tried out the blank firing of the 25 pounder, works ok, short clip with the sound turned down,

https://www.youtube.com/watch?v=GbCqMiKaRUQ
regards Jeff

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Sun Jan 27, 2019 4:15 pm

made a start on the sighting gear, most of the main elements are made, this is what I achieved in 2 days
Image
Image
Image
Image
regards Jeff

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Mon Jan 28, 2019 8:25 pm

the kit comes with a solid alloy telescope case that fits to brackets inside the shield, just for fun I thought I would bore this out and see what size the sighting telescope would be, as the photos show it is a tad small, I use the 1/6th figure to show scale, the last picture shows the diameter the new sighting scope
Image
Image
Image
Image
regards Jeff

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Thu Jan 31, 2019 4:41 pm

made the sighting scope and storage container, this looks closer to scale, retaining clips to be added to the container, also made and fitted the telescope holder to the sighting gear.
Image
Image
Image
Image
regards Jeff

Marcus Kwa
Posts: 149
Joined: Wed Nov 13, 2013 6:22 pm
Been Liked: 16 times

Re: Jeffs 25 pounder

Post by Marcus Kwa » Sat Feb 02, 2019 10:08 am

You have been busy!
The Armortek case is much to small, possibly patterned on the smaller No.29 sighting scope. The No.29 actually needed a spacer tube to fit into the sight clamp. The case for the no.29 scope however did not have the wider section at the lid, the scope did not have any protruding knobs or dials.

The no.41 scope however had 3 knobs/dials and had its case widened to accommodate these. The cap above that widened section also had a larger diameter than the remaining storage tube. Couldn't find my measurements of the actual thing....... :(
I used a rubber bicycle brake-cable bellows to make the eyepiece.
Image

Marcus

Marcus Kwa
Posts: 149
Joined: Wed Nov 13, 2013 6:22 pm
Been Liked: 16 times

Re: Jeffs 25 pounder

Post by Marcus Kwa » Sat Feb 02, 2019 2:20 pm

Oeps, I meant No.22 scope, that one is without dials! The No. 29 scope does have a knurled dial/knob on the top, and the No.41 has three.
I work too hard, I definitely have to start building again......

No.22, with storage tube:
Image


No.29, with storage tube:
Image
Image


And no. 41 with storage tube side by side of a No.22 to show the difference in size:
Image

Cheers,

Marcus

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Sat Feb 02, 2019 6:20 pm

thanks for all the info Marcus, I am sure we could all go raving mad trying to achieve perfection, I try and make the details look acceptable and in scale rather than having every nut bolt and rivet correct, not sure about the rubber bellows, what diameter are they, the ones I made scale up to 45mm this looks about right.
today I made the quadrant dial and pointer for the elevation,
Image
Image
regards Jeff

Marcus Kwa
Posts: 149
Joined: Wed Nov 13, 2013 6:22 pm
Been Liked: 16 times

Re: Jeffs 25 pounder

Post by Marcus Kwa » Sat Feb 02, 2019 8:38 pm

I have to agree with that...... My curse is: I travel a lot and so have too much time to ponder over details :?
When I am finally building, common sense normally kicks in (I do get carried away sometimes(....) :wink:).
That video is fun! Have you tried it with the lights out: is there some kind of flash visible?

Marcus

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Sun Feb 03, 2019 5:02 pm

A bit more completed on the sighting gear, made the sliding scale for the ranging cone, remade the quadrant scale for the elevation, the arc now runs true with the pointer, just the bracket for the iron sight to make then clean up the metalwork before painting
ImageImage
regards Jeff

Frank Breitenbach
Posts: 109
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Has liked: 5 times
Been Liked: 47 times

Re: Jeffs 25 pounder

Post by Frank Breitenbach » Mon Feb 04, 2019 7:21 am

Hello Jeff
A realy perfect model! Hope to see more impressive Details.
Kind regards
Frank

Jeffrey Goff
Posts: 593
Joined: Thu Jul 12, 2007 12:52 pm
Location: NORTHAMPTON
Has liked: 17 times
Been Liked: 117 times

Re: Jeffs 25 pounder

Post by Jeffrey Goff » Mon Feb 04, 2019 7:15 pm

sighting gear almost complete, just a few tweaks and cleaned before painting, parallel motion link is just resting on the brackets, as the sight operating arm needs some work, this is how far I got today, it might be a week or so before any updates, as I have a couple of projects to finish
Image
Image
Image
Image
Image
regards Jeff

User avatar
Stephen White
Site Admin
Posts: 2317
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 288 times
Been Liked: 528 times

Re: Jeffs 25 pounder

Post by Stephen White » Mon Feb 04, 2019 7:42 pm

Exquisite Jeff, there's something about these gun projects that lends itself to such fine work. The result is stunning. Sits up there with the best of the 88s. Stephen

Post Reply