internal details turret Tiger1

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
User avatar
Robert E Morey
Posts: 1733
Joined: Wed Jul 18, 2007 12:59 am
Location: Seattle, WA USA
Been Liked: 117 times

Re: internal details turret Tiger1

Post by Robert E Morey » Sun Jul 22, 2018 6:15 pm

Ivano
Beautiful job modeling all these parts. They look fantastic. I cannot imagine the CAD and research hours spent! But well worth it once done!
Best regards,
Bob

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sun Jul 22, 2018 8:14 pm

THANK YOU,
yes, a lot of time!

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sat Aug 18, 2018 7:36 am

Revised and corrected. Still some screws and bolts and it's finished. I did not find much material, but I think it is very similar to the original. What do you think about it? Would you like to add a comment? Available to order (excluding MG).
Attachments
DSCN4276.JPG
DSCN4278.JPG
DSCN4279.JPG
DSCN4270.JPG
DSCN4269.JPG
DSCN4268.JPG
DSCN4267.JPG
DSCN4265.JPG

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sun Oct 21, 2018 4:43 pm

Are these types of clamps sold only by FOA?
Nobody produces them in Europe?
Thanks if you want to give me information.
Attachments
claps.jpg
claps.jpg (76.38 KiB) Viewed 2220 times

simon_manning
Posts: 1599
Joined: Fri Nov 02, 2007 8:51 pm
Location: new forest,hampshire,u.k.
Been Liked: 418 times

Re: internal details turret Tiger1

Post by simon_manning » Sun Oct 21, 2018 6:41 pm

greetings ivano, contact steve winstone, he might still have some, he is in the u.k. regards simon manning.

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sun Oct 21, 2018 7:08 pm

Thank you!

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Tue Oct 30, 2018 6:44 pm

Excuse me, a question: do you know how the rear part of the machine-gun seat was made and how was the mechanism that connected it to the central beam?
From Tiger1 info drawings , you can not see it.
Thanks for your help.
Attachments
GunnerSeat5.gif
GunnerSeat5.gif (7.75 KiB) Viewed 2111 times
GunnerSeat1.gif
GunnerSeat1.gif (15.22 KiB) Viewed 2111 times

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Tue Jan 14, 2020 3:51 pm

It has nothing to do with the inside of the turret, but I didn't want to create another topic. Among the many drawings I found a job that I had done 3 years ago but that I had never printed. The muzzle brake. The measurements are those found on the David Birden website (information on tigre1). It is made of nylon. If interested, on order, it is available.
Thanks Ivano
Attachments
DSCN5901.JPG
DSCN5903.JPG
DSCN5905.JPG
DSCN5906.JPG
DSCN5908.JPG
DSCN5907.JPG

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Fri Apr 10, 2020 7:55 pm

I exhumed an old project,
I have to redo the interior because it's wrong.
Attachments
43.jpg
44.jpg
45.jpg
46.jpg
48.jpg
52.jpg

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sat Apr 11, 2020 7:37 pm

Other designs with new details.
I don't know if it will be possible to get a good result,
the various pieces are extremely small. If one day it will be possible
get back to work, we'll see. At the moment the closure has been extended until May 4th.
Happy Easter to all
Attachments
53.jpg
54.jpg
55.jpg
57.jpg
58.jpg
59.jpg
60.jpg

Vince Cutajar
Posts: 1531
Joined: Wed Nov 15, 2017 1:43 pm
Location: Malta
Has liked: 260 times
Been Liked: 921 times

Re: internal details turret Tiger1

Post by Vince Cutajar » Sat Apr 11, 2020 8:06 pm

Buona Pasqua Ivano.

Vince

mark lawson
Posts: 545
Joined: Tue May 14, 2013 9:14 pm
Location: Solihull
Has liked: 1431 times
Been Liked: 168 times
Contact:

Re: internal details turret Tiger1

Post by mark lawson » Sat Apr 11, 2020 9:52 pm

I think all you need now is the the dials,
Fantastic work one day I hope to see this printed.
Werkstatt - 5, 1/6 Panzer parts. werkstatt.five@gmail.com
RAG Militärmodellbau
IG Militärmodellbau

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Tue Jun 02, 2020 11:49 am

The biocular optics is also almost completed
Attachments
Complessivo 2.jpg
Complessivo 1.jpg

Jack Hrovatin
Posts: 88
Joined: Thu Dec 27, 2007 11:07 pm
Location: Chicago, Illinois
Been Liked: 18 times

Re: internal details turret Tiger1

Post by Jack Hrovatin » Sat Jun 06, 2020 4:22 pm

Ivano,
Your work is incredible....outstanding. I have purchased several of your pieces and am pleased with them all. Now, please tell me which internal a Tiger 1 turret pieces I can purchase from you, and I most certainly will! I think you still have my email address?

Respectfully,
Jack

Ivano Costantini
Posts: 452
Joined: Wed Jul 29, 2015 10:29 am
Been Liked: 500 times

Re: internal details turret Tiger1

Post by Ivano Costantini » Sun Jun 07, 2020 3:48 pm

Hi Jack,
I believe you have purchased everything that is currently available.
As soon as I have finished the L60, I will try, if it does not cost too much, to print the gyrocompass and the biocular viewer.
Anyway thanks

Post Reply