ferdinand

Forum for discussion relating to the Elefant
Post Reply
chris fry
Posts: 184
Joined: Tue Jul 24, 2007 1:21 pm
Location: southampton
Been Liked: 36 times

ferdinand

Post by chris fry » Sat Dec 15, 2018 11:54 am

Hello all, and welcome to my Ferdinand build, built for a customer in the uk, posted some pictures last week but thought I would post it in the correct topic,
Decided to convert the Armortek elefant in to the Ferdinand version, I like to build my models adding various details which might not be factually correct but I just like the detail/looks, I have altered from the elefant kit the engine deck, roof, mudguards, added detail to all the hatches (added/removed some), tool arrangement, altered the rear intake, and even done some work on the tracks!, added some aftermarket parts like Armorpax great tool boxes, Steve Winston lovely bosch headlights, also added zimmerate (Milliput) and surface texture (Mr surfacer 500), painting was upol high build etch primer, and fosco base colour (panzer grey), in my mind the best paint to use as a base start colour, then weathering, (Tamiya) and various washes (mig etc), I was lucky enough to have a great painter show me how to apply/use paints and washes so learning the tips of the trade,
so hope these pictures of our of some help to other builders, and if there's any picture you want some advice etc on please feel free to pm me,
will add some more pictures and some of the electrics in another post,
PVZA4450-640x480.JPG
elefant and ferinand together
PVZA4450-640x480.JPG (76.62 KiB) Viewed 1712 times
P1120123.JPG
P1120123.JPG (133.03 KiB) Viewed 1712 times
P1120114.JPG
P1120114.JPG (133.52 KiB) Viewed 1712 times
P1040413 (1)-640x480.JPG
roof details
P1040413 (1)-640x480.JPG (59.51 KiB) Viewed 1712 times
P1040416-640x480.JPG
R/h front engine deck
P1040416-640x480.JPG (65.25 KiB) Viewed 1712 times
P1040417 (1)-640x480.JPG
front sprocket
P1040417 (1)-640x480.JPG (46.26 KiB) Viewed 1712 times
P1040419 (1)-640x480.JPG
rear sprocket
P1040419 (1)-640x480.JPG (50.97 KiB) Viewed 1712 times
P1040421 (1)-640x480.JPG
road wheel
P1040421 (1)-640x480.JPG (45.87 KiB) Viewed 1712 times
P1040432 (1)-640x480.JPG
L/h front engine deck
P1040432 (1)-640x480.JPG (71.14 KiB) Viewed 1712 times
P1040437 (1)-640x480.JPG
jack and block
P1040437 (1)-640x480.JPG (64.63 KiB) Viewed 1712 times

chris fry
Posts: 184
Joined: Tue Jul 24, 2007 1:21 pm
Location: southampton
Been Liked: 36 times

Re: ferdinand

Post by chris fry » Sat Dec 15, 2018 12:48 pm

as promised some pictures, electrics mainly.
P1040387 (1)-640x480.JPG
batteries.
P1040387 (1)-640x480.JPG (57.33 KiB) Viewed 1693 times
P1040403 (1)-640x480.JPG
audio module and speaker
P1040403 (1)-640x480.JPG (39.03 KiB) Viewed 1693 times
P1040402 (1)-640x480.JPG
motion module
P1040402 (1)-640x480.JPG (38.95 KiB) Viewed 1693 times
P1040396 (1)-640x480.JPG
motors and smoker
P1040396 (1)-640x480.JPG (51.43 KiB) Viewed 1693 times
P1040392 (1)-640x480.JPG
smoker
P1040392 (1)-640x480.JPG (51.4 KiB) Viewed 1693 times
P1040395-640x480.JPG
recoil layout
P1040395-640x480.JPG (51.85 KiB) Viewed 1693 times
P1040393-640x480.JPG
receiver
P1040393-640x480.JPG (52.92 KiB) Viewed 1693 times
FUOZ5356-640x480.JPG
rear end
FUOZ5356-640x480.JPG (56.42 KiB) Viewed 1693 times
VGOO6130-640x480.JPG
side tool box
VGOO6130-640x480.JPG (74.92 KiB) Viewed 1693 times
UGVU7234-640x480.JPG
periscopes
UGVU7234-640x480.JPG (53.7 KiB) Viewed 1693 times

User avatar
Armortek
Site Admin
Posts: 2168
Joined: Tue Jul 10, 2007 10:30 am
Location: Winchester, England
Been Liked: 757 times

Re: ferdinand

Post by Armortek » Thu Jan 24, 2019 11:01 pm

Armortek

User avatar
Steen Vøler
Posts: 578
Joined: Mon Nov 19, 2012 2:45 pm
Location: Denmark
Has liked: 31 times
Been Liked: 163 times
Contact:

Re: ferdinand

Post by Steen Vøler » Fri Jan 25, 2019 7:25 am

This is a very good looking Ferdinand
cheers
Steen

www.panzerteam.dk

bryanrmassie
Posts: 121
Joined: Tue Sep 06, 2011 7:27 pm
Location: Montrose, scotland
Has liked: 7 times
Been Liked: 14 times

Re: ferdinand

Post by bryanrmassie » Fri Jan 25, 2019 6:28 pm

Nice Chris hope it doesn't put mine to shame !!

Bryan.

Post Reply