A 47 years old love

Forum for discussion relating to the Centurion
Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Fri Jan 25, 2019 6:38 pm

Hello Fabrice and Stephen
The problem is to provide a Video from the Wisent - I do not have it and in the winter - all is hard frozen.
So we must wait until spring. But thank´s for your Kind words.
All the best
Frank

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Sun Feb 03, 2019 4:29 pm

Hello
Some parts from the cooling system.
Frank
Image

Image

Image

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Tue Feb 05, 2019 3:51 pm

Hello
Next step forward.
Frank
Image

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Sat Feb 09, 2019 6:55 pm

Hello at all
The radiators are now inside.
Frank
Image

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Wed Feb 27, 2019 9:07 am

Hello at all
The first gearbox cover with the louvre is ready.
Frank
Image

Image

Image

User avatar
Adrian Harris
Posts: 3545
Joined: Thu Jul 12, 2007 10:46 pm
Location: U.K.
Has liked: 87 times
Been Liked: 110 times

Re: A 47 years old love

Post by Adrian Harris » Wed Feb 27, 2019 10:08 am

I'm very impressed with the 3D printed parts.

You're getting a very smooth surface finish.

What filament and layer height are you using ?

Adrian.
R.I.P Margaret I.L.Y

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Wed Feb 27, 2019 8:23 pm

Hello Adrian
I use a Zortrax M200. So I am working with Zortrax filament. It is ABS and the layer height is 0,14 or 0,19 mm when I print only vertical parts. The minimum layer height is 0,09 mm.
Frank

Frank Breitenbach
Posts: 95
Joined: Sun Feb 12, 2012 8:52 am
Location: Grafenau, Germany
Been Liked: 12 times

Re: A 47 years old love

Post by Frank Breitenbach » Tue Mar 05, 2019 2:58 pm

Hello at all
At first: Thank you to Stephen for the helpful pictures.

Well when I start the design I see a gap between my reference models from Taymia and the Centurion. So I visited the Full Museum with a Centurion. The result was that the new gearbox covers are a little bit longer. In the end of all the gap between the last crossbeam to the turret is more realistic (smaller) and all is nearly to my measurement from Full.
So here my pictures.
Frank
Image

Image

Image

Image

Post Reply