LAST SHIPPING DATE FOR 2019 WILL BE THURSDAY 12TH DECEMBER.
SHIPPING WILL RESUME ON THE 6TH JANUARY 2020.

Build Log

Forum for discussion relating to the Panzer III/StuG III
David Tannen
Posts: 42
Joined: Sun Nov 02, 2008 8:25 pm
Location: Redlands,California
Contact:

Post by David Tannen » Mon Sep 06, 2010 7:35 pm

Dennis


The turret will turn 360 and the elevation motor works fine. I still need to add the servo motor for the machine gun. Taking the speakers apart and soldering the wires out the side dropped them down ½ an inch.


Thanks
Last edited by David Tannen on Mon Sep 06, 2010 9:19 pm, edited 1 time in total.

David Tannen
Posts: 42
Joined: Sun Nov 02, 2008 8:25 pm
Location: Redlands,California
Contact:

Post by David Tannen » Mon Sep 06, 2010 7:37 pm

Mark

Thanks for the tip on the oil.

I did follow the READJUSTMENT OF SOUND MODULE all the sounds and LED flashes worked. I am using a Futaba 6ch trying ch5 or 6 and get a click noise. I have the engine sound on ch3. Should I use the INSTALLING THE TBS5 SOUNDMODULE WITH DIGITAL CONTROL section and use ch4?

Thanks

David Tannen
Posts: 42
Joined: Sun Nov 02, 2008 8:25 pm
Location: Redlands,California
Contact:

Build Log

Post by David Tannen » Mon Jan 03, 2011 1:05 am

01/01/11
Did some more work? Hope to be done by March. Then I can start on my Comet.
Image

Image

User avatar
Adrian Harris
Posts: 3720
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 149 times
Been Liked: 253 times

Post by Adrian Harris » Mon Jan 03, 2011 8:41 am

That's a good looking Panzer, David :D

I've been working on various bits over the holidays and it's a great model with which to tinker.

Adrian.
R.I.P Margaret I.L.Y

User avatar
Stephen White
Site Admin
Posts: 2398
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 316 times
Been Liked: 639 times

Lift device

Post by Stephen White » Mon Jan 03, 2011 9:08 am

David

Thanks for sharing. It looks as though you've found a lift device that will fit under a Pz III. Can I ask what make it is?

All the ones I've seen recommended so far need to be recessed into the table to get clearance under the vehicle.

Best regards

Stephen

David Tannen
Posts: 42
Joined: Sun Nov 02, 2008 8:25 pm
Location: Redlands,California
Contact:

Build Log

Post by David Tannen » Tue Jan 04, 2011 11:24 pm

Stephen

The stand is from eBay:
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=.

I did recess the plywood top on my scissor lift table. Then I added a ¾â€

Post Reply