Armortek

Hi Mark

Yes - printed on my new Ender 3Pro - total print time took 65 hours. Its cut up into 4 major parts and assambled with a glue that melts parts together so its very very stable in the construction

Hi all
Just finished my 3d printed 88mm tiger 1 turret gun interior and of the parts not used I sanded down one part to simulate the rifling at he end of the gun near the muzzle brake

Just need the final sanding to fit and then glue into place

mail is sent

My fault - my problem was slightly different. I had a setup where the bottom part of the tracklink made contact to the turret side and the upper part was ok. Therefore I grinded the track link down to make space on the lower part. What can be done to the problem that Ivano have, is maybe to extend t...

Hi Ivano

I took a file and removed 3 mm of the tracklink part that face down and have the road contact, so it will be like it is heavily used and wormed

Hope this helps. Have no possibility to take pictures of this mod at the moment

Had the same problem and i decided to grind down the track link hight that are facing the turret wall.
This gives a ok look and is really not visible in my setup

I am going and look forward to meet fellow tankers

hi Robert and congrats with your new Tiger 1 :-) Some use milliput I know, but take a look in the Tiger 1 / KingTiger section - there are lots of topics covering the Zimmerit stuff or even better - look into the knowledge base http://www.armortek.co.uk/Forum3b/viewtopic.php?f=32&t=7623&sid=2111f569a...

This is exciting

Hopefully my wish come true

Hi Liam
Long time since our last chat I have a couple of questions

Will the Steel tracks run with the standard Armortek sprocket and idler

How much is the shipping cost to Denmark APPX

Cheers Steen

Very nice details with the hatch openings - well done

Hi, would like to buy the tiger standoff bolts, that is if you will ship to Denmark for the additional cost

Cheers Steen

Another angle

Tiger 131
You can clearly see the cut off part

https://youtu.be/wkyh8FSL15k

Video from today at Panzermuseum East where I am pulling a Trabi