the gun cradle

Forum for discussion relating to the 88mm Flak36
Post Reply
David Pengelly
Posts: 129
Joined: Tue Jul 31, 2007 4:48 pm
Location: South Wales ( the old one )

the gun cradle

Post by David Pengelly » Wed Jul 01, 2009 3:16 pm

When the right and left hand side plates CF0306 and CF030M are offered up to the sides of the trough its apparent that the plates will sit on top of some of the rivit heads . I would be interested to know what others have done before i proceed any further.
At the momnent i am tempted to remove the rivets that will foul the plates.
Was die Hölle das war

David Ward
Posts: 90
Joined: Thu Jul 12, 2007 5:17 pm
Location: Broadstairs, Kent

Post by David Ward » Wed Jul 01, 2009 5:37 pm

Hello David

On the 2 88's I built I used countersunk rivets.

David

Colin Richards
Posts: 59
Joined: Sat Jul 21, 2007 8:14 am
Location: Fakenham
Has liked: 4 times

Post by Colin Richards » Sat Jul 04, 2009 1:41 pm

Dave
I simply left out the fixings where the side plates fit. Incidently I used 10BA round head bolts instead of the rivetts. From thenoutside they look like rivetts and with nuts on the inside have produced a strong connection.

Colin

Post Reply