Early Tiger 1 Steel Track Links and Pins

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
Liam Mahoney
Posts: 57
Joined: Fri Feb 14, 2014 10:30 pm
Location: Queensland Australia
Been Liked: 12 times

Early Tiger 1 Steel Track Links and Pins

Post by Liam Mahoney » Wed Nov 30, 2016 11:55 pm

I am considering ordering more steel track links and pins for the early Tiger 1 (no chevrons).
The links are investment cast and therefore require a little work to assemble. There will be a chucking reamer supplied with the 200 links to clean the pin holes. These tracks are not as detailed as Vincent’s, but I have tested them for more than 24 hours in some very harsh conditions, and they can be run very loose allowing for full suspension travel. I will also be offering steel drive sprocket rings.
The pins are fitted with c-clip locking rings.
If there is enough interest I will order 10 sets.
Please PM me for price and further details.
Liam
Attachments
DSC04043.JPG
DSC04040.JPG
DSC04019.JPG
DSC03635.JPG
DSC03634.JPG
DSC03632.JPG
DSC03548.JPG

Post Reply