Tiger Bump Stops

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
steve winstone
Posts: 125
Joined: Sat Jul 14, 2007 3:36 pm
Location: Waltham Abbey, Essex
Been Liked: 18 times

Tiger Bump Stops

Post by steve winstone » Sun Sep 20, 2015 2:59 pm

Hi All

I am getting a small batch of Tiger 1 Bump Stop cast's. Anyone who is looking for a set please let me know by email. This will be the last time I will probably be getting the bump stops as I am scaling down making parts.

Image


Image

Anyone who is interested in the parts I make please email me for a catalogue at steve.winstone@sky.com

Regards
Steve

John Snook
Posts: 24
Joined: Tue Jul 07, 2015 8:42 pm

Re: Tiger Bump Stops

Post by John Snook » Sun Sep 20, 2015 5:24 pm

Steve, you have a pm
John Snook

John Heath
Posts: 158
Joined: Tue Jul 07, 2015 6:23 pm
Has liked: 4 times
Been Liked: 57 times

Re: Tiger Bump Stops

Post by John Heath » Sun Sep 20, 2015 10:48 pm

Steve you have another PM.

John Heath

John Snook
Posts: 24
Joined: Tue Jul 07, 2015 8:42 pm

Re: Tiger Bump Stops

Post by John Snook » Wed Dec 16, 2015 7:57 am

Steve,
You have a PM
John

Mark Adams
Posts: 47
Joined: Wed Jan 15, 2014 2:58 pm

Re: Tiger Bump Stops

Post by Mark Adams » Sun Mar 27, 2016 7:09 pm

Steve, are these still available?

Thanks!
Mark

steve winstone
Posts: 125
Joined: Sat Jul 14, 2007 3:36 pm
Location: Waltham Abbey, Essex
Been Liked: 18 times

Re: Tiger Bump Stops

Post by steve winstone » Mon Mar 28, 2016 1:34 pm

hi mark yes the bump stops are still available send me a email and I will give a price
with p&p at steve.winstone@sky.com
regards
steve

Mark Adams
Posts: 47
Joined: Wed Jan 15, 2014 2:58 pm

Re: Tiger Bump Stops

Post by Mark Adams » Fri Apr 01, 2016 6:00 am

Steve, did your reply to my email bounce?

Mark

Mark Adams
Posts: 47
Joined: Wed Jan 15, 2014 2:58 pm

Re: Tiger Bump Stops

Post by Mark Adams » Fri Apr 22, 2016 6:24 pm

Hi Steve,

I've still not heard from you on this. Are we still a go?

steve winstone
Posts: 125
Joined: Sat Jul 14, 2007 3:36 pm
Location: Waltham Abbey, Essex
Been Liked: 18 times

Re: Tiger Bump Stops

Post by steve winstone » Sat Apr 23, 2016 1:46 pm

Hi Mark, I sent you an email with the invoice but did not hear any more from you. If you can send me an email to steve.winstone@sky.com then I will try again.

I have now only got two sets of tiger 1 bump stops left and will not be doing any more as my moulds for the rubber stops are no longer usable, and I will not be making a new set of moulds.

Regards
Steve

If anyone would like a catalogue of my parts please email me steve.winstone@sky.com

Mark Adams
Posts: 47
Joined: Wed Jan 15, 2014 2:58 pm

Re: Tiger Bump Stops

Post by Mark Adams » Sun Apr 24, 2016 2:59 am

Hi Steve,

email sent!

Mark

andymusgrove
Posts: 46
Joined: Mon May 23, 2016 2:10 pm
Location: Pease Pottage
Has liked: 58 times
Been Liked: 8 times

Re: Tiger Bump Stops

Post by andymusgrove » Tue May 09, 2017 4:12 pm

Hi All

Just started my Tiger 131 Build and looking for a set of Steve Winstons Bump Stops - does anyone have a set they are not using at all ?

Many thanks

Andy

Greg Stephens
Posts: 126
Joined: Fri Nov 07, 2014 11:34 pm
Has liked: 1 time
Been Liked: 3 times

Re: Tiger Bump Stops

Post by Greg Stephens » Sat Jul 07, 2018 7:49 pm

I am for a set of the bump stops as well. If any one had a good resin version lying around I might try to do some casting.

Post Reply