Bergepanther William

Forum for discussion relating to the Bergepanther
William Gardeniers
Posts: 155
Joined: Fri Jul 24, 2009 5:38 pm
Location: Netherlands
Has liked: 4 times
Been Liked: 29 times

Re: Bergepanther William

Post by William Gardeniers » Sat Oct 06, 2018 5:37 pm

Thank you Bob and Fabrice.

Working on the aufbau the original from armotek have 4 hinged side panels in real it was only the right and left side.
DSC_0003.11JPG.JPG
rearside
DSC_0270.1JPG.JPG
leftside
DSC_0273.1JPG.JPG
DSC_0271_11.JPG
DSC_0272.11JPG.JPG
With Regards William

William Gardeniers
Posts: 155
Joined: Fri Jul 24, 2009 5:38 pm
Location: Netherlands
Has liked: 4 times
Been Liked: 29 times

Re: Bergepanther William

Post by William Gardeniers » Wed Oct 24, 2018 12:37 pm

Hello

made a start with the steeltracks from Vincent. I would like to thanks Martin for his good drawings of the sprocket rings.
IMG-20161119-WA0001.jpeg
IMG-20161204-WA0002.jpeg
DSC_0024.1JPG.JPG
DSC_0025.1JPG.JPG
With Regards William

Rolf Mönke
Posts: 165
Joined: Sat Aug 03, 2013 6:40 am
Location: Germany,Hamburg
Been Liked: 1 time

Re: Bergepanther William

Post by Rolf Mönke » Thu Oct 25, 2018 11:06 am

Hello William,

a really great model !!
Greetings from Hamburg

Rolf

bosswilli-hh@gmx.de

Online
Phil Woollard
Posts: 2013
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 436 times
Been Liked: 886 times
Contact:

Re: Bergepanther William

Post by Phil Woollard » Thu Oct 25, 2018 4:00 pm

Looking good William, I love all your fabrication, regards Phil :D
Mechanical engineer, Pyrotechnic technician, and small time farmer.
Youtube channel, Magpiespyro. For 1/6th scale video action!
Email; magpiespyro@hotmail.com

Martin Hofmann
Posts: 256
Joined: Tue Jan 06, 2015 4:20 pm
Location: Hamburg, Germany
Has liked: 8 times
Been Liked: 140 times

Re: Bergepanther William

Post by Martin Hofmann » Thu Oct 25, 2018 5:54 pm

Hi William,
thank you for the compliments for the drawings. I can see that the chamfers of the parts you have built are very small. Is there a possibility to come to the 5 mm and 15° seen on the drawing, because that is very important for finding the teeth to the track links! But all in all your Bergepanther is a very very amazing tank with so much details - i love it :D :D
PS: don't forget the distance plate of 1,5 mm between the ring and the body :!: :!:
Regards Martin

William Gardeniers
Posts: 155
Joined: Fri Jul 24, 2009 5:38 pm
Location: Netherlands
Has liked: 4 times
Been Liked: 29 times

Re: Bergepanther William

Post by William Gardeniers » Sun Oct 28, 2018 4:18 pm

Hello

thanks for the comments . Martin the distance plate is mountet the chamfers on the teeth will come wenn the tracks are mountet and i can run it.
DSC_0012.1JPG.JPG
DSC_0013.1JPG.JPG
Made a new deckplate wich has the right openings .
DSC_0121.JPG
DSC_0122.JPG
With Regards William

William Gardeniers
Posts: 155
Joined: Fri Jul 24, 2009 5:38 pm
Location: Netherlands
Has liked: 4 times
Been Liked: 29 times

Re: Bergepanther William

Post by William Gardeniers » Sat Jul 13, 2019 9:16 pm

Made some update's on the winch
DSC_0485.1JPG.JPG
Attachments
DSC_0508.1JPG.JPG
DSC_0504.1JPG.JPG
DSC_0498.1JPG.JPG
With Regards William

William Gardeniers
Posts: 155
Joined: Fri Jul 24, 2009 5:38 pm
Location: Netherlands
Has liked: 4 times
Been Liked: 29 times

Re: Bergepanther William

Post by William Gardeniers » Sun Jul 14, 2019 1:47 pm

Some small parts.
Attachments
DSC_0164.1JPG.JPG
DSC_0163_1555220815774.1JPG.JPG
DSC_0166.1JPG.JPG
With Regards William

Post Reply