Comet 036 escapes from the boxes

Forum for discussion relating to the Comet
Post Reply
Derek Attree
Posts: 1023
Joined: Thu Jul 12, 2007 12:44 pm
Location: london
Has liked: 55 times
Been Liked: 31 times

Comet 036 escapes from the boxes

Post by Derek Attree » Mon Jul 29, 2013 1:09 pm

Hi Guys
After 3 long years sitting under a bench at the back of the garage
I finally got my Comet out of its boxes.

I have had to clear the workshop after the building work on the house amazing how much rubbish I took to the dump even after 2 visits from the grab hire lorry :shock:

I am now just cleaning the parts ready to etch prime the parts for the inner hull
so I can get that bolted together.

I will be taking some photos as I go and will post them here as this section has been
a bit dead to say the least... :D

I will be making some detail changes as I go no doubt but only items that are obvious
and visible...

Regards

Derek
we must stop making stupid predictions

Steve Stuart
Posts: 661
Joined: Fri Apr 18, 2008 11:34 pm
Location: Oxford
Has liked: 77 times
Been Liked: 57 times

Re: Comet 036 escapes from the boxes

Post by Steve Stuart » Mon Jul 29, 2013 6:53 pm

Hi Derek
Some inspiration is needed, I look forward to your progress reports!
Steve

Derek Attree
Posts: 1023
Joined: Thu Jul 12, 2007 12:44 pm
Location: london
Has liked: 55 times
Been Liked: 31 times

Re: Comet 036 escapes from the boxes

Post by Derek Attree » Wed Aug 07, 2013 8:23 am

Hi Guys
So the comet inner hull is primed and I am putting it together.
I have to say this is the easiest Armortek yet as everything just falls together.
I will take some pictures over the next couple of days and post them here.

Derek
we must stop making stupid predictions

Post Reply