hi all
Hope someone can answer this
I have dismounted the Armortek soundsystem as it was defect.
This leaves these to wires disconnected from the Armourtek sound system.
Do they have to be connected to a sound system for me to drive the tank. Reason for asking is that the tank does not move, however the main gun moves after I took the defect sound and amplifier out
I am awaiting the new sound system from Armortek to arrive but would have loved to drive with the tank in the wait time
cheers
steen
why does my JagdPanther not drive
- Steen Vøler
- Posts: 766
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 493 times
- Adrian Harris
- Posts: 4820
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1137 times
- Been liked: 1298 times
Re: why does my JagdPanther not drive
> Do they have to be connected to a sound system for me to drive the tank.
No.
With the 4QD based system, the two leads from the DMR-203 need to go to the channels on the receiver which control the two tracks. You should then be able to drive the tank as before.
Adrian.
No.
With the 4QD based system, the two leads from the DMR-203 need to go to the channels on the receiver which control the two tracks. You should then be able to drive the tank as before.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
- Günter Gäbelein
- Posts: 148
- Joined: Fri Sep 16, 2011 4:48 pm
- Location: Germany
- Has liked: 41 times
- Been liked: 98 times
- Contact:
Re: why does my JagdPanther not drive
Hi Steen,
at the Sound System there should be also two cables, which were connected with the receiver. The Sound System (i.e. the Benedini) is connected to the driving and turning channel of the receiver and also the Motion Pack. If you remove the Sound System, you have to connect both channels from the receiver to the Motion Pack.
at the Sound System there should be also two cables, which were connected with the receiver. The Sound System (i.e. the Benedini) is connected to the driving and turning channel of the receiver and also the Motion Pack. If you remove the Sound System, you have to connect both channels from the receiver to the Motion Pack.
Kind regards
Günter
Günter
- Steen Vøler
- Posts: 766
- Joined: Mon Nov 19, 2012 2:45 pm
- Location: Denmark
- Has liked: 62 times
- Been liked: 493 times
Re: why does my JagdPanther not drive
Thanks guys
I have reconnected and it runs again
Video will be posted tonight
cheers
Steen
I have reconnected and it runs again
Video will be posted tonight
cheers
Steen